PE-L16 6V L16 Deep Cycle Flooded Battery
Model PE-L16 · Flooded Deep Cycle Batteries
The flagship 6-volt, 360 Ah (20-hr) flooded lead acid deep cycle battery in the BCI Group 903 (L16) size, delivering 795 minutes of reserve capacity at 25 A. The highest-capacity model in the Pure Energy deep cycle range for renewable energy storage, floor care, aerial platforms, and heavy utility duty.
Voltage
6 V (nominal)
Capacity (20-hr rate)
360 Ah
Weight (wet)
104 lb (47 kg)
BCI Group Size
903
Features
- Deep cycle flooded lead acid (FLA), non-sealed construction
- 3-cell, 6-volt L16-format design in BCI Group 903 size
- Range-topping 360 Ah 20-hr capacity and 795 min reserve at 25 A
- Heat-sealed polypropylene case
- Offset "S" terminals with bolt-through hardware
- Standard vent caps, bayonet caps optional
- 1.270 minimum specific gravity at full charge
- Suited for golf cars, floor care, aerial work platforms, renewable energy storage, and utility vehicles/RV
Technical Specifications
| Electrical | |
|---|---|
| Voltage | 6 V (nominal) |
| BCI Group Size | 903 |
| Type | Flooded lead acid (FLA), non-sealed, deep cycle |
| Number of Cells | 3 |
| Capacity Ratings | |
| Capacity (20-hr rate) | 360 Ah |
| Capacity (1-hr rate) | 193 Ah |
| Capacity (2-hr rate) | 223 Ah |
| Capacity (5-hr rate) | 270 Ah |
| Capacity (6-hr rate) | 281 Ah |
| Capacity (10-hr rate) | 312 Ah |
| Capacity (48-hr rate) | 381 Ah |
| Capacity (72-hr rate) | 391 Ah |
| Capacity (100-hr rate) | 400 Ah |
| Reserve Capacity @ 25 A | 795 min |
| Reserve Capacity @ 56 A | 287 min |
| Reserve Capacity @ 75 A | 198 min |
| Mechanical | |
| Length | 11-7/8 in (302 mm) |
| Width | 7-1/8 in (181 mm) |
| Height | 16-3/4 in (425 mm) |
| Weight (wet) | 104 lb (47 kg) |
| Terminal Type | Offset "S" |
| Terminal Torque | 100-120 in-lb (8.3-10 ft-lb) |
| Connection Hardware | Square-head SS or zinc-plated bolt with SS or zinc-plated hexnut and split-ring lock washer |
| Case Material | Polypropylene, heat sealed |
| Specific Gravity at Full Charge | 1.270 minimum |
| Vent Cap | Standard, bayonet optional |
| Charging & Temperature | |
| Charge Profile - Bulk | 7.35 ± 0.15 V at 36.0 A to setpoint |
| Charge Profile - Absorption | 7.35 V, taper to 10.8 A, 2-3 hr |
| Charge Profile - Float (optional) | 6.51 V, unlimited duration |
| Charge Profile - Equalize | 7.65 ± 0.15 V, 1-3 hr every 30 days |
| Charge Time from Full Discharge | 9-12 hr |
| Charge Termination | Time (2-4 hr) or dV/dt 4 mV/cell/hr |
| Temperature Correction | -0.084 V per 10 °F above 80 °F |
| Charging Temperature Range | 0 to 120 °F (-18 to 49 °C) |
| Discharging Temperature Range | -20 to 120 °F (-29 to 49 °C) |
| Equalization Interval | Every 30 days in active service |
| Applications | |
| Typical Applications | Golf cars, floor care, aerial work platforms, renewable energy storage, utility vehicles and RV |
Get the PE-L16 From a Local Dealer
Our nationwide dealer network provides sales, installation and support.
Find a Dealer Register Your Warranty